HW-T8-72/80F SMT
The HW-T8-72/80F is an eight-head intelligent high-speed SMT pick and place machine developed by HWGC (Huawei Guochuang), a professional China SMT machine manufacturer. This fully automatic pick and place machine applies advanced machine vision to place surface mount technology components onto PCB pads with reliable precision, making it a versatile chip mounter for high-mix PCB assembly. With dual-head simultaneous pickup, fixed-shooting flight centering, and a placement speed of 10,000–12,000 pcs/h, the HW-T8-72/80F is a dependable core unit for any SMT assembly line, and it doubles as an efficient LED placement machine for LED bulbs, LED displays, and lighting products.
Key Features
- Eight placement heads with dual-head simultaneous pickup and 8-head simultaneous flight centering recognition
- High precision: 0.05 mm placement accuracy, 0.05 mm repeatability, and 0.01 mm positioning accuracy
- Placement speed of 10,000–12,000 pcs/h for efficient SMT production
- Large placement area: 470×420 mm without tray (72F) or 470×360 mm without tray (80F)
- 72/80 feeder positions (based on 8 mm feeders), compatible with YAMAHA CL series feeders and JUKI nozzles
- 3 IC tray slots (286 positions) for large, tall, and odd-form components
- One-key auto programming from CSV/TXT coordinate files with optimal path planning
- Over 24 hours of continuous non-stop operation with emergency stop, tri-color alarm lamp, and feeder lift alarm
Technical Specifications
| Model | HW-T8-72/80F |
| Placement Accuracy | 0.05 mm |
| Repeatability | 0.05 mm |
| Positioning Accuracy | 0.01 mm |
| Placement Speed | 10,000–12,000 pcs/h |
| Placement Area | (72F) 470×420 mm without tray / 430×300 mm with tray; (80F) 470×360 mm without tray / 430×220 mm with tray; minimum 50×50 mm |
| Component Range | 0201, 0402, 0603, 0805, 1206, LED beads, diodes, transistors, SOT, QFP/BGA up to 30×30 mm with lead pitch above 0.3 mm; custom vision available for odd-form components |
| Nozzles | 8 (JUKI-compatible nozzles) |
| Component Angle | ±180° |
| Component Height | ≤7 mm |
| Simultaneous Pickup | Dual-head simultaneous pickup |
| Nozzle Buffer Range | 4.5 mm |
| Z-Axis Maximum Stroke | 20 mm |
| Feeders | 72/80 positions (based on 8 mm feeders) |
| Feeder Type | Electric feeders, pneumatic feeders, vibration feeders, IC trays |
| Feeder Compatibility | YAMAHA CL series feeders |
| IC Tray Slots | 3 trays (286 positions) |
| IC Tray Size | L460×W350 mm |
| Feeder Safety | Feeder lift alarm |
| Auto Loading | Automatic material allocation and automatic pickup coordinate positioning |
| Board Thickness | ≤3 mm (3–5 mm process edge required in automatic mode) |
| Track Adjustment | Manual / electric automatic adjustment |
| Transfer Mode | Left to right by default; both-side connection supported; three-stage board loading |
| Board Safety | Anti-static conveyor belt and board sensors |
| Vacuum Source | Dual-coil vacuum generator (with high-speed vacuum break on/off) |
| Vacuum Mechanism | Active-breaking high-flow vacuum generator |
| Air Pressure | 0.5–0.7 MPa |
| Air Supply Requirement | Oil-water separator required; external tank of at least 60 L with dust filter and pressure stabilizer |
| Operating System | Windows-based, self-developed HWGC intelligent operating system |
| Control Host | Intel high-performance industrial PC |
| Drive System | High-speed DSP drive with AC servo motors |
| XY Maximum Travel | 645×680 mm |
| XY Drive Guide | Linear guides + rolled/ground ball screws (optional) |
| XY Motion Mode | Intelligent curve acceleration/deceleration linear linkage with built-in linear interpolation |
| Motion Protection | High-wear-resistant drag chain and flexible cables |
| Safety System | Emergency stop button, tri-color alarm lamp, cover-open speed reduction/stop |
| Vision System | 1 mark camera, 8 high-speed recognition cameras, 1 high-precision camera |
| Display | 17-inch industrial control display |
| Imaging Mode | Fixed-shooting flight centering |
| Recognition Mode | 8 heads recognize and pick simultaneously |
| Mark Point Recognition | Manual / fully automatic positioning |
| Vision Safety | Missing-component auto correction, component angle auto correction, invalid part auto rejection |
| Programming Method | Coordinate file import, one-key auto programming, optimal path planning |
| Compatible File Formats | CSV / TXT direct import |
| Electrical Protection | Leakage protector, thermoset housing (non-melting, non-dissolving), high-quality anti-crack connectors |
| Power Supply | AC 220 V 50/60 Hz 1000 W |
| Continuous Operation | Over 24 hours non-stop |
| Dimensions (before packing) | L1375×W1420×H1400 mm |
| Dimensions (after packing) | L1470×W1580×H1550 mm |
| Weight (before packing) | 500 kg |
| Weight (after packing) | 590 kg |
Applications
Thanks to its flexible feeder system, accurate flight centering vision, and generous placement area, the HW-T8-72/80F SMT pick and place machine is a smart choice for electronics manufacturing: LED lighting and LED display production, consumer electronics, power supplies, communication modules, and mixed high-mix SMT assembly lines. As a chip mounter that accepts JUKI nozzles and YAMAHA CL feeders, it fits smoothly into existing surface mount technology production environments. Whether you are starting a new PCB assembly line or expanding SMT capacity, HWGC supplies this fully automatic pick and place machine factory-direct with full technical support and export service from our factory in China.
Foreign Trade Sales: Mr. Sun
Phone · WhatsApp · WeChat: +86 18210740377
Email: zghwgc@gmail.com
Website: www.smthw.com
Factory Address: Building 21, Junding Science & Technology Park, Shiyin Village, Luquan District, Shijiazhuang, Hebei, China
