HW-T6-64F SMT
The HW-T6-64F is a six-head, high-speed, fully automatic SMT pick and place machine from a leading China SMT machine manufacturer, designed as the core machine of any SMT assembly line. Using machine vision to place surface mount components onto designated PCB pad coordinates with precision, this chip mounter efficiently handles 0201 parts and components under 7 mm at 9,000–10,000 pcs/h. Combining a 5-megapixel industrial calibration camera, six fast recognition cameras, and three-stage automatic board feeding, it delivers stable, cost-effective PCB assembly for mid-sized electronics manufacturers.
Key Features
- High-speed placement of 9,000–10,000 pcs/h with 0.05 mm placement accuracy and 0.01 mm positioning accuracy.
- Efficient placement of 0201 components and all parts under 7 mm, plus common 0402, 0603, 0805, 1206, 1210, LED3528, LED5050, diodes, and SOT packages.
- Professional 5-megapixel HD imported industrial-grade calibration camera with a matching 5-megapixel distortion-free industrial vision lens, reliably placing chips up to 35 x 35 mm with 0.3 mm pin pitch (0.5 mm center distance) at a success rate above 99.5%, solving fine-pitch and BGA placement challenges.
- Six industrial-grade fast recognition cameras enable six-head simultaneous recognition, nearly doubling placement efficiency compared with the previous generation.
- Automatic Mark point scanning and three-stage automatic board feeding improve placement precision during board changeover and boost production efficiency.
- Connectable with other SMT equipment to build a complete, fully automated production line.
- Deeply optimized programming software: operators simply load feeders as suggested by the software, with most tedious work handled by the computer.
- Fully tested and proven in batch production, with high-end configuration, stable performance, and simple operation for a cost-effective fully automatic placement machine.
Technical Specifications
| Model | HW-T6-64F |
| Placement Accuracy | 0.05 mm |
| Repeatability | 0.05 mm |
| Positioning Accuracy | 0.01 mm |
| Continuous Working Time | Over 24 hours non-stop |
| Placement Speed | 9,000–10,000 pcs/h |
| Placement Area | 490 x 360 mm without tray; 430 x 240 mm with tray; min. 50 x 50 mm |
| Component Range | 0201, 0402, 0603, 0805, 1206, LED beads, diodes, triodes, SOT; QFP and BGA up to 30 x 30 mm with pin pitch above 0.3 mm; custom vision for special-shaped components available |
| Nozzles | 6 (JUKI-compatible) |
| Component Angle Support | ±180° |
| Component Height | ≤7 mm |
| Simultaneous Pick Mode | Dual-head simultaneous pick-up |
| Nozzle Buffer Range | 4.5 mm |
| Z-Axis Max Stroke | 20 mm |
| Feeders | 64 positions (based on 8 mm feeders) |
| Feeder Type | Electric feeders, pneumatic feeders, vibration feeders, IC trays; YAMAHA CL series feeders |
| IC Trays | 4 trays (384 positions), tray size L650 x W330 mm |
| Feeder Safety System | Feeder lift alarm |
| Feeding Method | Automatic material layout distribution and automatic pick-up coordinate positioning |
| Board Thickness | ≤3 mm; 3–5 mm process edge required in automatic mode |
| Rail Adjustment | Manual / electric automatic adjustment |
| Transport Mode | Left-to-right by default; supports both-side connection and three-stage board feeding |
| Transport Safety | Antistatic conveyor belt and board sensors |
| Vacuum Source | Dual-coil vacuum generator (with high-speed vacuum break) |
| Vacuum Mechanism | Active-break high-speed, high-flow vacuum generator |
| Air Pressure | 0.5–0.7 MPa |
| Air Supply Requirement | Oil-water separator required; external tank of no less than 60 L with dust filtration and stable pressure |
| Operating System | Windows-based self-developed Huawi Guochuang intelligent operating system |
| Control Host | Intel high-performance industrial PC |
| Drive System | High-speed DSP drive with AC servo motors |
| Motion Safety | Emergency stop button, three-color alarm light, cover-open slowdown/stop |
| XY Max Stroke | 630 x 680 mm |
| XY Drive Rail | Linear guides + rolled/ground ball screws (optional) |
| XY Motion Mode | Intelligent curve acceleration/deceleration linear linkage with built-in linear interpolation |
| Motion Protection | High-wear-resistant cable chains and flexible cables |
| Circuit Protection | Leakage protector and thermoset housing (non-melting, crack-resistant, leak-proof with excellent connectors) |
| Vision System | 1 Mark camera, 6 high-speed recognition cameras, 1 high-precision camera |
| Display | 17-inch industrial control monitor |
| Capture Method | Fixed capture with flying centering |
| Recognition Method | 6-head simultaneous recognition and pick-up |
| Mark Recognition | Manual / fully automatic positioning |
| Vision Safety Checks | Automatic missing-component correction, component angle correction, invalid-component rejection |
| Programming Method | Coordinate file import, one-key automatic programming, optimal path planning |
| Compatible File Formats | CSV / TXT direct import |
| Power Supply | AC 220 V, 50/60 Hz, 800 W |
| Dimensions | L1172 x W1350 x H1313 mm (before packaging); L1410 x W1410 x H1520 mm (after packaging) |
| Weight | 438 kg (before packaging); 530 kg (after packaging) |
Applications
Developed by Beijing Huawi Guochuang Electronic Technology Co., Ltd. after years of technical accumulation, the HW-T6-64F targets mid-sized enterprises that need stable, reliable, and cost-effective batch production on a real SMT production line. It is widely used for LED placement machine applications, consumer electronics, industrial control boards, and communication products. With six-head simultaneous recognition, a high-precision chip camera, and automatic three-stage board feeding, this fully automatic chip mounter brings professional surface mount technology to your PCB assembly process at an attractive price.
Foreign Trade Sales: Mr. Sun
Phone · WhatsApp · WeChat: +86 18210740377
Email: zghwgc@gmail.com
Website: www.smthw.com
Factory Address: Building 21, Junding Science & Technology Park, Shiyin Village, Luquan District, Shijiazhuang, Hebei, China
