HW-S100-250330
The HW-S100-250330 is a fully automatic PCB loader built by HWGC, a China SMT machine manufacturer. This PCB handling equipment automatically feeds bare boards from a 355x320x563 mm magazine onto an SMT production line, and it can also serve as a quality sampling station. It accepts PCBs from 50x50 mm up to 350x250 mm with a thickness of 0.4-3.0 mm, stores up to 50 boards per full magazine load, and delivers them at a transfer height of 900±20 mm. Controlled by a Siemens dedicated PLC with a freely settable lift pitch of 10-50 mm, the loader keeps board supply steady so downstream PCB assembly equipment never waits for boards.
Key Features
- Fully automatic magazine-to-line board feeding with 50-board full-load storage capacity
- Handles PCBs from 50x50 mm up to 350x250 mm with board thickness of 0.4-3.0 mm
- Siemens dedicated PLC controller for reliable and repeatable loading cycles
- Lift pitch of 10, 20, 30, 40 or 50 mm, freely settable, with 1-5 step selection at 10 mm intervals
- Front fixed edge as standard, rear fixed edge available on order
- Left-to-right transfer as standard, right-to-left available on order
- Anti-static conveying with 1500 VAC withstand voltage and 1000 Vp-p noise immunity
- Compact footprint of 1200x780x1250 mm and machine weight of 140 kg
Technical Specifications
| Applicable Magazine Size | 355x320x563 mm |
| PCB Size | 50x50 to 350x250 mm |
| PCB Thickness | 0.4-3.0 mm |
| Magazine Size | 355x320x563 mm |
| Full-Load Board Storage | 50 boards |
| Machine Dimensions | 1200x780x1250 mm |
| Machine Weight | 140 kg |
| Power Supply | Single-phase 220 V |
| Startup Power / No-Load Power | 100 W |
| Lift Pitch | 10, 20, 30, 40, 50 mm, freely settable |
| Compressed Air | 5-6 kgf/cm2, 10 L/min |
| Fixed Edge | Front fixed (rear fixed available on order) |
| Transfer Direction | Left to right (right to left available on order) |
| Transfer Height | 900±20 mm |
| Pitch Selection | 1-5 steps (10 mm pitch) |
| High-Voltage Withstand | AC terminal to ground 1500 VAC, 1 minute |
| Operating Environment | Environment free of corrosive gases and dust |
| Anti-Interference | Voltage noise: 1000 Vp-p, pulse width 1 us, 1 minute |
| PLC | Siemens (dedicated controller) |
SMT Industry News
At NEPCON Asia 2026, held in October 2026, next-generation SMT placement systems, advanced packaging solutions and autonomous material handling took center stage, including the China debut of the ASMPT SIPLACE V, Essemtec all-in-one SMT and packaging solutions, and Hanwha Semitec chip mounters working alongside AMR robots. The message for electronics manufacturers was clear: the SMT line of the near future moves boards end to end with as little manual intervention as possible. Peripheral PCB handling equipment such as automatic board loaders is a key part of that shift, because magazine-based board feeding lets the whole line - printer, chip mounter and reflow oven - run continuously without an operator standing at the front of the line.
Applications
The HW-S100-250330 sits at the front of an SMT production line, feeding PCBs to a solder paste printer, SPI inspection, or directly to a chip mounter. It suits PCB assembly workshops, electronics manufacturing plants and LED lighting factories that run small and medium boards. Because it doubles as a quality sampling station, operators can inspect boards without interrupting production. As part of a complete SMT production line from a China SMT machine manufacturer, this automatic loader cuts manual handling and keeps downstream equipment productive.
Foreign Trade Sales: Mr. Sun
Phone · WhatsApp · WeChat: +86 18210740377
Email: zghwgc@gmail.com
Website: www.smthw.com
Factory Address: Building 21, Junding Science & Technology Park, Shiyin Village, Luquan District, Shijiazhuang, Hebei, China
