HW-T4-44/50F SMT
The HW-T4-44/50F is a four-head, high-speed, fully automatic SMT pick and place machine from a China SMT machine manufacturer, offered in two configurations - the HW-T4-50F and the HW-T4-44F - to match different PCB sizes and feeder counts. Using machine vision, this chip mounter places surface mount components onto PCB pads with placement accuracy of 0.05 mm and positioning accuracy of 0.01 mm. Its 5,000-8,000 pcs/h placement speed and continuous 24-hour working capability make it a dependable core of any SMT assembly line.
Key Features
- Four placement heads with dual-head simultaneous pickup
- Placement accuracy of 0.05 mm and positioning accuracy of 0.01 mm
- Placement speed of 5,000-8,000 pcs/h with continuous operation beyond 24 hours
- Two configurations: 50F area of 320x130 mm (with tray) / 360x190 mm (without tray); 44F area of 320x200 mm (with tray) / 360x260 mm (without tray)
- 50 or 44 feeder positions (8 mm feeder standard), compatible with YAMAHA CL series feeders
- Vision system with 1 mark camera, 4 high-speed recognition cameras and 1 high-precision camera
- Component range from 0201 passives to QFP/BGA up to 30x30 mm, plus LED beads, diodes, transistors and SOT
- Desktop or vertical machine frames to suit different workshop layouts
- One-key automatic programming with CSV/TXT coordinate file import
Technical Specifications
| Product Model | HW-T4-44/50F |
| Placement Accuracy | 0.05 mm |
| Repeat Placement Accuracy | 0.05 mm |
| Positioning Accuracy | 0.01 mm |
| Continuous Working Time | Non-stop operation beyond 24 h |
| Placement Speed | 5,000-8,000 pcs/h |
| Placement Area (50F) | 320x130 mm with tray / 360x190 mm without tray; 50x50 mm minimum |
| Placement Area (44F) | 320x200 mm with tray / 360x260 mm without tray; 50x50 mm minimum |
| Component Range | 0201, 0402, 0603, 0805, 1206, LED beads, diodes, transistors, SOT; QFP/BGA up to 30x30 mm with pin pitch over 0.3 mm; custom vision for odd-shaped components |
| Nozzles | 4 (JUKI compatible) |
| Component Angle | +/-180 degrees |
| Component Height | Max 7 mm |
| Simultaneous Pickup | Dual-head simultaneous pickup |
| Nozzle Buffer Range | 4.5 mm |
| Z-axis Maximum Stroke | 20 mm |
| Feeder Positions | 50 / 44 positions (8 mm feeder standard) |
| Feeder Types | Electric feeder, pneumatic feeder, vibration feeder, IC tray |
| Feeder Series | YAMAHA CL series compatible |
| IC Tray Quantity | 1 tray (48 positions) |
| IC Tray Size | L320xW150 mm |
| Loading Method | Automatic material optimization |
| Pickup Method | Manual / automatic |
| Board Thickness | Max 3 mm (3-5 mm process edge required in automatic mode) |
| Rail Adjustment | Manual / electric automatic adjustment |
| Conveying Mode | Left-to-right by default; supports both-side connection; single-stage board feeding |
| Conveyor Safety | Anti-static conveyor belt with board sensors |
| Vacuum Source | Vacuum generator (high-speed on/off vacuum breaking) |
| Vacuum Mechanism | Active-breaking high-speed high-flow vacuum generator |
| Air Pressure | 0.5-0.6 MPa |
| Air Supply Requirement | Oil-water separator; external air tank of at least 50 L with dust filter and pressure stabilizer |
| Operating System | Windows-based HWGC intelligent operating system (developed in-house) |
| Control Host | Intel high-performance industrial computer |
| Drive System | High-speed DSP drive with AC servo motors |
| Motion Safety System | Emergency stop button, tri-color alarm light, slowdown/stop when cover opened |
| XY Maximum Stroke | 440x570 mm |
| XY Guide Rail | Linear guide + rolled/ground ball screw (optional) |
| XY Motion Mode | Intelligent curve acceleration/deceleration with built-in linear interpolation |
| Motion Protection | High-wear-resistant drag chain and flexible cables |
| Recognition Devices | 1 mark camera, 4 high-speed recognition cameras, 1 high-precision camera |
| Display | 17-inch industrial control display |
| Imaging Method | Fixed-position flying centering |
| Recognition Method | 4 heads recognize and pick simultaneously |
| Mark Point Recognition | Manual / fully automatic positioning |
| Vision Safety Checks | Automatic correction of missed parts, automatic component angle correction, automatic rejection of invalid parts |
| Programming Method | Coordinate file import, one-key automatic programming, optimal path planning |
| Compatible File Formats | CSV / TXT direct import |
| Circuit Protection | Leakage protector, thermoset non-melting housing, crack-free quality interfaces, anti-leakage |
| Power Supply | AC 220 V, 50/60 Hz, 600 W |
| Dimensions (Desktop) | L900xW1140xH875 mm (before packing); L1000xW1240xH1000 mm (after packing) |
| Dimensions (Vertical) | L900xW1145xH1280 mm (before packing); L1000xW1245xH1450 mm (after packing) |
| Weight (Desktop) | 210 kg (before packing); 250 kg (after packing) |
| Weight (Vertical) | 280 kg (before packing); 345 kg (after packing) |
Applications
The HW-T4-44/50F is engineered for SMT production lines in electronics manufacturing, covering PCB assembly for consumer electronics, LED lighting, power supplies and industrial control systems. Its four-head design and 0201-to-BGA component range make it equally capable as a chip mounter for dense boards and as an LED placement machine for LED lamp bead mounting. Choosing this surface mount technology equipment from a proven China SMT machine manufacturer is a cost-effective way to raise the capacity and quality of your SMT assembly line.
Foreign Trade Sales: Mr. Sun
Phone · WhatsApp · WeChat: +86 18210740377
Email: zghwgc@gmail.com
Website: www.smthw.com
Factory Address: Building 21, Junding Science & Technology Park, Shiyin Village, Luquan District, Shijiazhuang, Hebei, China
